酒店家具生产过程 现代简约圆形餐桌

酒店家具在生产过程中应注意的事项：1、外观质量外观质量首先要求家具表面光滑，做工精细，装饰精细，质地清晰美观。室内家具通常由刨花板、中密度纤维板、细木工板、层压板等制成，单板、木单板、三层胶合板作为覆盖材料.不同基材和包层材料的材料性能也不同。如果不注意材料的性和正确使用方法，往往会导致钢板翘曲。酒店家具生产过程   现代简约圆形餐桌北京和俊新美家具建议，面板背面和正面的覆层材料的结构征必须相同或相似。基材的含水量应为6-10%，材料应尽可能多地选择同一批次。缩短装压时间，不同材料性，不同含水率的覆盖材料，注意不同厚度的胶水，压榨时间和压力。

During the production process of hotel furniture, attention should be paid to: 1. Appearance quality. The first requirement for appearance quality is that the furniture surface is smooth, the workmanship is fine, the decoration is fine, and the texture is clear and beautiful. Indoor furniture is usually made of particle board, medium density fiberboard, blockboard, laminated board, etc., with veneer, wood veneer, and three-layer plywood as covering materials. The material properties of different substrates and cladding materials also vary. If the material properties and correct usage methods are not taken into consideration, it often leads to warping of the steel plate. Beijing and Junxinmei Furniture suggest that the structural characteristics of the cladding materials on the back and front of the panel must be the same or similar. The moisture content of the substrate should be 6-10%, and as many materials as possible should be selected from the same batch. Shorten the pressing time, cover materials with different material properties and moisture content, pay attention to different thicknesses of glue, pressing time, and pressure.

2、结构强度是酒店家具生产过程中应注意的第二点室内家具大多以固定家具、板材为主的一般结构，选用木螺丝、五金连接器和胶粘剂作为连接方式。在使用材料时应注意不同的材料性，如刨花板、中密度板钉握力差，避免需要频繁移动或钉握力强的部位，酒店家具生产过程   现代简约圆形餐桌如门铰链螺钉、底轨螺钉等，容易松脱。钕应别注意床板和框架上的金属悬挂部分，或使用木材代替加固。目前，流行的45度倒木悬挂结构。

2. Structural strength is the second point that should be noted in the production process of hotel furniture. Most indoor furniture is a general structure mainly composed of fixed furniture and panels, and wooden screws, hardware connectors, and adhesives are used as connection methods. When using materials, attention should be paid to different material properties, such as particle board and medium density board, which have poor nail grip. Avoid parts that require frequent movement or strong nail grip, such as door hinge screws, bottom rail screws, etc., which are prone to loosening. Neodymium should not pay attention to the metal suspension parts on the bed board and frame, or use wood instead of reinforcement. At present, the popular 45 degree inverted wood suspension structure.

3、材料成本还满足使用要求，尽量使用低成本的材料，在使用大表面材料的同时注意使用小块相同材料，全面提高板材利用率。房间家具的数量一般比较大，尽量利用计算机进行合理的布局，酒店家具生产过程   现代简约圆形餐桌对大小件材料进行综合利用，降低材料成本。不同的结构应注意材料成本的比较

3. The material cost also meets the usage requirements, and low-cost materials should be used as much as possible. While using large surface materials, attention should be paid to using small pieces of the same material to comprehensively improve the utilization rate of the board. The quantity of furniture in a room is generally relatively large. It is advisable to use computers for reasonable layout, comprehensively utilize materials of large and small items, and reduce material costs. Different structures should pay attention to the comparison of material costs

4、高效生产在饭店家具材料成本相同的情况下，这种材料易于加工，这种技术可以节省加工成本，提高效率，别是在端铣、圆磨、雕刻加工中，这种材料易于加工切削，易于光洁，易于加工。

4. Efficient production. When the material cost of restaurant furniture is the same, this material is easy to process. This technology can save processing costs and improve efficiency, especially in end milling, circular grinding, and carving processing. This material is easy to process and cut, smooth, and easy to process.

5、运输与安装酒店的楼层一般都很高，要求家具的重量很容易运输。酒店家具生产过程   现代简约圆形餐桌别是一些连接床背、一些加长办公桌、电梯无法运输、货运电梯一般在安装家具时已拆除，如何安全运输，从材料和结构的重量方面要别考虑。

5. The floors of hotels for transportation and installation are generally high, requiring furniture to be easy to transport. Don't worry about connecting the back of beds, lengthening office desks, inability to transport in elevators, or freight elevators that are usually removed during furniture installation. How to transport safely depends on the weight of materials and structures.