酒店家具定制 电动餐桌用材注意事项 餐台保

酒店家具定制电动餐桌用材注意事项：一、电动餐桌泡棉：根据不同客人的喜好，电动餐桌海绵的硬度为软、中、硬，湘源酒店家具生产的高档酒店家具一般为45m3，以满足五星级酒店家具的要求。酒店家具定制     电动餐桌用材注意事项  餐台保养一层泡沫必须粘在海绵上，使它坐起来更舒服。在对电动餐桌进行检测时，海绵的使用厚度可以通过电动餐桌基座看到，海绵的软、硬和密度也需要拆卸。直接的方法是坐下来，感觉舒服。

Notes on the use of customized electric dining table materials for hotel furniture: 1. Electric dining table foam: According to the preferences of different guests, the hardness of electric dining table sponge is soft, medium, and hard. The high-end hotel furniture produced by Xiangyuan Hotel is generally 45m3 to meet the requirements of five-star hotel furniture. A layer of foam must be stuck to the sponge to make it more comfortable to sit up. When testing electric dining tables, the thickness of the sponge can be seen from the base of the electric dining table, and the softness, hardness, and density of the sponge also need to be removed. The direct method is to sit down and feel comfortable.

二、电动餐桌面布和皮革：表面材料的选择直接决定电动餐桌的外观。酒店家具定制     电动餐桌用材注意事项  餐台保养香苑酒店家具给您一点建议：高频电动餐桌和餐椅(如餐厅、大堂等)应采用耐用面料或皮革，可延长电动餐桌和餐椅的美观周期。

2、 Electric dining table fabric and leather: The choice of surface material directly determines the appearance of the electric dining table. Xiangyuan Hotel Furniture: High frequency electric dining tables and chairs (such as restaurants, lobbies, etc.) should be made of durable fabrics or leather, which can extend the aesthetic cycle of electric dining tables and chairs.

三、电动餐桌框架：采用木与复合板(胶合板)，目前电动餐桌框架基本上采用复合板，复合板的优点是：易加工，不易引起昆虫，不易腐蚀，强度高等优点。木材在使用前通常需要干燥。酒店家具定制     电动餐桌用材注意事项  餐台保养1.电动餐桌背框：你需要戴上橡皮筋。因为后机架的承载能力不如座椅机架的承载能力大。2.电动餐桌底座：S弹簧加小张力弹簧用于背衬。这是一个很好的承受方式。

3、 Electric dining table frame: Made of wood and composite board (plywood). Currently, electric dining table frames are mostly made of composite board. The advantages of composite board are: easy processing, less likely to cause insects, less prone to corrosion, and high strength. Wood usually needs to be dried before use. 1. Electric dining table back frame: You need to wear rubber bands. Because the load-bearing capacity of the rear frame is not as large as that of the seat frame. 2. Electric dining table base: S spring with small tension spring for backing. This is a great way to bear it.

四.规格：一般主体结构厚度35mm，主体结构部分为实木整体，两侧打磨。酒店家具该如何保养：如此大量的酒店客房家具，如果损坏、维修非常麻烦，不仅造成经济损失，而且耽误了业务，所以酒店客房家具的日常维护保养尤为重要!酒店套间家具要持续更长时间，应掌握一套正确的维修方法，以下是维修方法的内容，希望您能更正确地使用酒店套房家具产品。酒店家具定制     电动餐桌用材注意事项  餐台保养首先，放置家具的地板必须保持清洁，这样家具的四英尺才能更稳定和平衡。

4、 Specification: The general thickness of the main structure is 35mm, and the main structure is made of solid wood as a whole, with both sides polished. How to maintain hotel furniture: If such a large amount of hotel room furniture is damaged or repaired, it is very troublesome, not only causing economic losses, but also delaying business. Therefore, the daily maintenance of hotel room furniture is particularly important! Hotel suite furniture needs to last for a longer period of time, and one should master a correct set of repair methods. The following are the contents of the repair methods. We hope you can use hotel suite furniture products more correctly. Firstly, the floor on which furniture is placed must be kept clean, so that the four feet of furniture can be more stable and balanced.

家具放置后，应确保其不处于晃动状态。否则，长期摇晃会导致家具上的一些紧固件脱落并粘在地上。方也会开裂，使家具的寿命自然减少。其次，酒店套房的家具产品会因为地面太软而导致不平衡，酒店家具定制     电动餐桌用材注意事项  餐台保养那么你可以考虑修剪地面，或者用一些纸板铺四英尺的地面，这不仅可以保护地板，还可以保护家具本身。在平时清洁家具的过程中，尽量不要使用腐蚀性酸碱清洗液，而要使用中性清洗产品，这样可以保护家具表面质量不受腐蚀性物质的损害。

After placing furniture, it should be ensured that it is not in a shaking state. Otherwise, long-term shaking can cause some fasteners on the furniture to fall off and stick to the ground. Fang will also crack, naturally reducing the lifespan of furniture. Secondly, the furniture products in hotel suites may be imbalanced due to the soft floor. Therefore, you can consider trimming the floor or using some cardboard to lay a four foot floor, which not only protects the floor but also the furniture itself. In the process of cleaning furniture, try not to use corrosive acid-base cleaning solutions, but use neutral cleaning products to protect the surface quality of furniture from being damaged by corrosive substances.