电动大餐台 全自动餐桌保养方法

电动大餐台    全自动餐桌保养方法

Maintenance of Electric Dining Table

1、由于电动大餐台是长时间的不间断的使用，电动大餐台    全自动餐桌保养方法很容易发生故障，所以需要经常的请一些专业的人员来定期的做检查，维修。以保证电动大餐台能正常使用。

1. Due to the continuous use of electric dining tables for a long time, they are prone to malfunctions, so it is necessary to regularly invite some professional personnel for regular inspection and maintenance. To ensure the normal use of the electric dining table.

2、在购买时也要注意，坚决不能买三无产品，电动大餐台    全自动餐桌保养方法应为电动大餐台是比较大型的电器设施，三无产品的质量肯定是很差的，也容易出故障。

2. When purchasing, it is also important to note that it is absolutely not allowed to buy Sanwu products. The electric dining table is a relatively large electrical facility, and the quality of Sanwu products is definitely very poor, and they are also prone to malfunctions.

3、故障一般出现时，会伴随着有许多的情况出现，电动大餐台    全自动餐桌保养方法比如电动大餐台发热、机壳带电等等，接着再根据万用表、兆欧表等这些表上面所出现的数据来判断，还可以试灯、电流穿烧等等方式来找出故障出现的原因。ZUI后再由专业人士来进行维修，其中在维修时要严格把关，必须做到每一个小故障点都完全修好。

3. When a fault generally occurs, it is accompanied by many situations, such as electric dining table heating, chassis electrification, and so on. Then, based on the data displayed on these meters such as multimeter and megohmmeter, the cause of the fault can also be found by testing the lamp, current burning, and other methods. After the ZUI is repaired, professional personnel will carry out the maintenance. During the maintenance, strict control must be exercised, and every small fault point must be completely repaired.

4、在每次故障维修好之后，都必修要经过一段时间的检测，必须保证电动大餐台不会再一次出现问题，以保证客人在用餐时的安全。

4. After each failure is repaired, it is necessary to undergo a period of testing to ensure that the electric dining table will not have problems again, to ensure the safety of guests during meals.

5、注意的是电动大餐台在电机维修时，必须要是专业人员来维修，电动大餐台    全自动餐桌保养方法不然非专业人士去维修很可能会对电动大餐台的电机造成二次伤害，也会对维修人员造成伤害。

5. Note that when maintaining the motor of the electric dining table, it must be serviced by professional personnel, otherwise non professional personnel may cause secondary injury to the motor of the electric dining table and may also cause injury to the maintenance personnel.去维修很可能会对电动大餐台的电机造成二次伤害，也会对维修人员造成伤害。