实木电动桌修复电动桌翻新技巧方法

1、实木电动桌电动桌翻新方法：一般在实木电动桌电动桌翻新前，很多处电动桌都会存在着严重的刮痕、开裂等现象，因此需要将其进行处理；然后将实木电动桌电动桌表面清洁干净再进行打磨，打磨可采用专门的电动桌实木电动桌电动桌翻新打磨机器，其目的是为了刮掉木电动桌上的漆；

1. Renovation method for solid wood electric tables: Generally, before renovating solid wood electric tables, many electric tables will have serious scratches, cracks, and other phenomena, so it is necessary to treat them; Then clean the surface of the solid wood electric table before polishing. The polishing can be done using a specialized electric table, solid wood electric table electric table renovation polishing machine, with the purpose of scraping off the paint on the wooden electric table;

接下来调配好腻子，并均匀的涂抹在实木电动桌电动桌上，并将其风干；电动桌上的腻子风干后便可以进行上漆、上油和打蜡了，等到油漆干燥后，实木电动桌电动桌翻新也就算完成了。

Next, prepare the putty and evenly apply it to the solid wood electric table, and air dry it; After the putty on the electric table is air dried, it can be painted, oiled, and waxed. After the paint dries, the renovation of the solid wood electric table is considered complete.

2、实木电动桌电动桌翻新技巧：在对实木电动桌电动桌进行打磨后需要观察电动桌的平整度，如果有明显的凹凸处，则需要重新打磨平整，打磨的厚度在0.5毫米左右适宜；其次是很多墙角处用打磨机器是不能够打磨到的。

2. Renovation Techniques for Solid Wood Electric Table Electric Table: After polishing the solid wood electric table, it is necessary to observe the flatness of the electric table. If there are obvious concave and convex areas, it needs to be re polished and leveled, with a suitable thickness of about 0.5mm; Secondly, many wall corners cannot be polished with polishing machines.

因此需要用砂纸进行手动打磨，这样才能够保证打磨的效果，而打磨的方法好是先用粗砂纸打磨，再使用细砂纸，从四个方向逐一进行；

Therefore, it is necessary to manually polish with sandpaper in order to ensure the polishing effect. A good polishing method is to first polish with coarse sandpaper, and then use fine sandpaper, one by one from four directions;

实木电动桌电动桌翻新后的打蜡和上油十分的重要，这能够提高实木电动桌电动桌的使用寿命和光泽，因此在腻子风干后应按照上油漆、上油、打蜡的顺序进行。

The waxing and oiling of the renovated solid wood electric table is very important, which can improve the service life and luster of the solid wood electric table. Therefore, after the putty is air dried, it should be done in the order of painting, oiling, and waxing.

3、实木电动桌电动桌翻新的养护：实木电动桌电动桌翻新后效果几乎和新购买是没有区别，但是它的表面却被打磨了，因此实木电动桌电动桌的厚度也变薄了，从而其生命也变得更加脆弱了，因此需要好好的养护。

3. Maintenance of the refurbished solid wood electric table: The effect of the refurbished solid wood electric table is almost the same as that of a new purchase, but its surface has been polished, so the thickness of the solid wood electric table has also become thinner, making its life more fragile. Therefore, good maintenance is needed.

实木电动桌电动桌翻新后的养护先需要每一个月打蜡一次，这样能够保持木电动桌表面的光泽度；同时在翻新后，不能够将砂石带入，否则会磨损实木电动桌电动桌表面；对于实木电动桌电动桌的接缝也需要定期处理，否则长期堆积便难以处理，是表面的美观度下降。·：

After the renovation of the solid wood electric table, the maintenance of the electric table needs to be waxed once a month to maintain the glossiness of the surface of the wooden electric table; After renovation, sand and gravel should not be brought in, otherwise the surface of the solid wood electric table will be worn; For solid wood electric tables, the seams of electric tables also need to be regularly treated, otherwise long-term accumulation will be difficult to handle, resulting in a decrease in surface aesthetics