电动桌多功能项目包含哪些？电动餐桌批发市场

学生可根据自己的需要移动课桌本体和凳子的距离，即便是在上课时间移动电动桌，也不会产生噪音，影响其他同学。那么学生电动桌多功能项目包含哪些呢？下面内容了解更多！一种新式智能学生电动桌，包含电动桌本身，上述电动桌本身包含桌面上、桌洞和桌脚，其点是：

Students can move the distance between the desk and the stool according to their own needs, even if they move the electric desk during class hours, it will not produce noise and affect other students. So what are the multifunctional projects for student electric desks? Learn more about the following content! A new type of intelligent student electric table, including the electric table itself. The electric table itself includes the table top, table hole, and table legs, with the following features:

上述桌面上坐落于桌洞的上边，上述桌面设立一层隔热层，桌面上的一侧旁边设立隔热保温电源开关，用以操纵上述的隔热层升温，适用冬季应用；上述桌面上下侧设立支撑架，支撑架底部固定不动在电动桌本身两侧外内壁，支撑架对桌面上具有支撑点的功效，确保桌面上的歪斜设定，便捷学员应用；

The above desktop is located above the table hole, and a layer of insulation layer is set up on the desktop. A thermal insulation power switch is set up next to one side of the desktop to control the heating of the insulation layer, suitable for winter applications; A support frame is set up on the upper and lower sides of the above desktop, with the bottom of the support frame fixed on the outer and inner walls of both sides of the electric table itself. The support frame has the function of supporting points on the desktop, ensuring the skewness setting on the desktop and facilitating students' application;

上述桌洞里侧及表层上各自设立红外测距仪和警报灯，上述警报灯与红外测距仪联接，红外测距仪用以精确测量学员的人体、头部与电动桌本身中间的间距，若学员的人体、头部与电动桌本身中间的间距太近，非常容易危害到学员撰写的姿态和眼睛视力，根据警报灯闪动提醒；

Infrared distance measuring instruments and warning lights are respectively installed on the inner side and surface of the above table holes. The warning lights are connected to the infrared distance measuring instrument, which is used to accurately measure the distance between the student's human body, head, and the electric table itself. If the distance between the student's human body, head, and the electric table itself is too close, it is very easy to harm the student's posture and eye vision when writing. According to the flashing warning light, it is necessary to remind;

上述桌洞正中间设立立柱，立柱两侧设立底座，底座固定不动安裝在立柱上，底座內部插有竖梁，竖梁的部水准设立承重梁，竖梁与承重梁固定不动联接，竖梁与承重梁联接组成T形架，承重梁与桌面上的长边平行面，应用时，将竖梁插进底座内，即能够让学员摆正座姿，因为T形架的功效，学员的双眼到书籍间距也做到一定间距，维护了学员的眼睛视力，当必须歇息时，只需将T形架从底座上取下就可以；

A column is set up in the middle of the above table hole, and a base is set up on both sides of the column. The base is fixed and fixed and installed on the column. A vertical beam is inserted inside the base, and a load-bearing beam is set up at the level of the vertical beam. The vertical beam is fixedly connected to the load-bearing beam, forming a T-shaped frame. The load-bearing beam is parallel to the long side of the desktop. When applied, the vertical beam is inserted into the base, which can help the student position the seat correctly, because of the effectiveness of the T-shaped frame, The distance between the students' eyes and the books is also maintained to maintain their visual acuity. When it is necessary to rest, simply remove the T-frame from the base;

上述桌脚坐落于桌洞左边四周，上述桌洞左边设立旋转路桩，旋转路桩下侧设立支撑点柱，上述旋转路桩下侧根据调整螺钉连接支撑点柱，支撑点柱左边水准设立基座，基座下侧设立联接块，联接块左边设立降噪滚轴I，降噪滚轴I上设立刹车踏板设备I，上述降噪滚轴I下拖动联接有导轨，上述导轨上还设立椅子，椅子的降噪滚轴II与导轨为拖动联接，降噪滚轴II上设立刹车踏板设备II，学员可依据自身的必须挪动电动桌本身和椅子的间距，就算是在上课时间挪动学生电动桌，也不会造成噪声，危害别的同学。

The above table legs are located around the left side of the table hole. A rotating road stake is set up on the left side of the table hole, and a support point column is set up on the lower side of the rotating road stake. The support point column is connected to the lower side of the rotating road stake according to the adjustment screw, and a base is set up horizontally on the left side of the support point column. A connection block is set up on the lower side of the base. A noise reduction roller I is set up on the left side of the connection block, and a brake pedal device I is set up on the noise reduction roller I. The noise reduction roller I is dragged and connected to a, A chair is also installed on the above-mentioned guide rail, and the noise reduction roller II of the chair is connected to the guide rail by dragging. A brake pedal device II is installed on the noise reduction roller II, and students can move the distance between the electric table and the chair according to their own needs. Even if the student's electric table is moved during class time, it will not cause noise and harm other students.